dip switches grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.grayhill.com .100 .005 (2,54 0,13) typ. c l c l .305 .010 (7,75 0,25) length .010 (0,25 see order info .380 .010 (9,65 0,25) .025 (0,64) r. .424 .015 (10,77 0,38) typ. .303 .015 (7,70 0,38) .023 (5,84) ref. .012 .001 (0,30 0,03) typ. .055 .010 (1,40 0,25) .280 (7,11) typ. .530 (13,46) typ. c l c l .070 (1,78) typ. .100 (2,54) typ. series 76hp side actuated piano-dip ? dimensions in inches (and millimeters) r ecommended pc pad dimensions circui try specification s electrical ratings make-and-break c urrent rating: 2,000 operations per switch position at 1 ma, 5 vdc; 50 ma, 30 vdc; or 150 ma, 30 vdc c ontact resistance: initial: 30 mohms maximum; after life: 100 mohms maximum (10 ma at 50 vdc, open circuit) i nsulation resistance: minimum, at 100 vdc between adjacent closed contacts and also across open switch contacts. initial: 2,000 mohms dielectric strength: minimum voltage (ac r ms) measured between adjacent closed contacts and also across open switch contacts. initial: 750 volts; after life: 500 volts c arry rating: 5 amps, maximum rise of 20c switch capacitance: 2 pf at 1 megahertz mechanical ratings mechanical life: 2,000 operations per switch position fea tures ? compatible with sm t assembly including infrared r efow and vapor-phase ? easily accessed when pc boards are r acked ? r eliable spring and ball contact vibration resistance: per method 204, t est condition b. 1 ms opening (10 ms allowed) mechanical shock: per method 213, t est condition a. 1 ms opening (10 ms allowed) t hermal shock resistance: per specifcation; no failures; passes contact resistance t erminal strength: per specifcation thermal aging: 1,000 hours at 85c; no failures e nvironmental ratings meets all requirements of mil- s-83504**. where grayhill performance is superior, the mil spec is listed in parentheses. operating t emperature range: -40c to + 85c storage t emperature range: -55c to + 85c moisture resistance: per mil-s t d-202, method 106 soldering i nformation solderability: per mil-s td-202, method 208 t ested to eia standard rs-448-2. resistance to soldering heat: per mil-s-83504, six second test recommended p rocessing t emperature: 220cC230c (1 pass260c maximum) p rocessing p osition: switch is to be processed with all actuators in the closed (on) position as shipped. materials and finishes shorting member: brass, gold-plated over nickel barrier. base contacts: copper alloy, gold-plated, over nickel barrier. t erminals: copper alloy, matte tin plated over nickel barrier. non-conductive parts: cover is natural color thermoplastic, actuators are white thermoplastic (ul94v-o) t ape seal: not available with t ape seal. as viewed from the top of the switch in the positions shown in the drawing. meets requirements of eia 481-2 or eia 481-3 e ach reel has a 15.750 inch (390 mm) minimum leader and a 6.30 inch (160 mm) minimum trailer. available from your local grayhill distributor. for prices and discounts, contact a local sales offce, an authorized local distributor or grayhill. no. of length length carrier width part positions* (inches) (metric) dim. a number 2 0.280" 7,1 mm 24 mm 76hpsb02gw rt 4 0.480" 12,2 mm 24 mm 76hpsb04gw rt 6 0.680" 17,3 mm 32 mm 76hpsb06gw rt 8 0.880" 22,4 mm 44 mm 76hpsb08gw rt 10 1.080" 27,4 mm 44 mm 76hpsb10gw rt * for other lengths, contact grayhill, inc. ** note: 100% matte tin terminal plating does not meet mil-s-83504 for lead content. ordering informa tion : t ape and r eel packaging (500 switches per reel) tap e and reel p ac k aging dip 8 surface mount dip switches 13 inch diameter reel direction of feed 16 & 24mm tape 16mm 32, 44 & 56mm tape 16mm pin one location conductive plastic embossed tape cover tape 7 6 h p s b 0 8 g w o p e n x x x x 7 6 h p s b 0 8 g w o p e n x x x x 7 6 h p s b 0 8 g w o p e n x x x x 7 6 h p s b 0 8 g w o p e n x x x x 7 6 h p s b 0 8 g w o p e n x x x x 7 6 h p s b 0 8 g w o p e n x x x x dim. a (see order info.)
|
